Search with filters on certificate files, documents and labos
Filters
X
Search with filters on certificate files, documents and labos
Zoek op inhoud
Certificatietype
Toepassing
Product
- Aggregates from secondary sources TRA 40 (36)
- Aggregates R/CE2+ 20 (307)
- Aggregates TRA 411 (22)
- Application of a mastic asphalt for waterproofing (1)
- Application of a protaction layer in mastic asphalt (3)
- Application of mastic asphalt (2)
- Asphalt mixtures TRA 64 (36)
- Base materials for road marking TRA 84 (28)
- Bitumen and bituminous binders CE-marking R/CE 54 (20)
- Bitumen emulsions and flux bitumen TRA 56 (13)
- Bitumen for road construction TRA 54 (22)
- Bituminous mixtures R/CE2+ 64-65 (25)
- Cables-protectors, cable trenches and covers TR 107 (20)
- Canal elements and embankment gutters TR 108 (20)
- Cast iron pipes TRA 06 (12)
- Cast iron road materials COPRO TRA 80 COPRO/TRA 80 BENOR (25)
- Cellulose fibers TRA 63 (6)
- Cisterns for water discharge TR 105 (20)
- CO2 performance ladder CRC 03 (19)
- Cold asphalt TRA 61 (10)
- Concrete barrel TR 114 (20)
- Concrete kerb units TR 11A (10)
- Concrete manholes and inspection chambers TR 21-101 (21)
- Concrete paving blocks TR 11A (10)
- Concrete paving blokc with split surface TR 11A (10)
- Concrete paving flags TR 11A (9)
- Concrete pipes TR 21-106 (21)
- Crash cushions and terminals TRA 69-3 (19)
- Disposal of tar-containing asphalt BRS 8049 (11)
- Draining and perforated pavings TR 123 (4)
- Draining pipes TR 104 (3)
- Eco Tech building materials CRC 03 (1)
- Elastomeric products TRA 32 (25)
- End of Waste Wallonia (SSD) (52)
- Etablishment for sort out TRA S 10 (19)
- Fillers TRA 12 (26)
- Gabion TRA 68 (25)
- Geogrid TRA 24 (19)
- Geotextile TRA 29 + R/CE2+ 29 (23)
- Glass beads and antiskid aggregates TRA 81 + R/CE 1423 (30)
- Hydraulically bound mixtures - fixed unit TRA 21 (119)
- Hydraulically bound mixtures - mobile unit TRA 21 (35)
- Hydraulically bound mixtures - site work unit TRA 21 (28)
- Joint fillers and sealants TRA 46 (20)
- Ladders for inspection pits (4)
- Masonry units TR 21-001 (5)
- Mastic asphalt TRA 65 (22)
- Metallic reinforcements and grids TRA 67 (19)
- Miscellaneous (2)
- Natural asphalt TRA 66 (18)
- Parts for non-tested safety barriers from steel TRA 69-1 (15)
- Physico-chemically cleaned aggregates TRA 17 (35)
- Pigmentable binders TRA 58 (12)
- Polymer modified bitumen TRA 55 (17)
- Prefabricated concrete products ATR 100 (20)
- Reclaimed asphalt for bituminous mixtures TRA 13 (38)
- Recycled aggregates - fixed location TRA 10 (449)
- Recycled aggregates - mobile recycling TRA 11 (145)
- Restraint systems from metal and from precast concrete BRS 8004-1 (10)
- Retaining walls elements TR 21-132 (20)
- Road concrete TRA 50 (63)
- Road materials in natural stone TRA 19 (7)
- Road restraint systems from in situ concrete (4)
- Road restraint systems R/CE 1 69 (32)
- Safety barriers from in situ concrete TRA 69-4 (14)
- Safety barriers from steel TRA 69-2 (22)
- Safety barriers from wood-metal TRA 69-5 (14)
- Safety bumpers in prefabricated concrete TR 124 (20)
- Shaft elements TR 21-102 (20)
- Street funiture and garden products (13198 21-131) (4)
- Sulfer concrete products TRA 23 (2)
- Surface treatments R/CE2+ 62 (8)
- Synthetic grass and gravel tiles TRA 28 (10)
- Synthetic liners for manholes and inspection chambers TRA 45 (12)
- Synthetic pipes and connectors (5)
- Tree protectors in cast iron TRA 803 (8)
- Underground infiltration systems (8)
- Vitrified clay pipe systems TRA 95 (23)
- Water permeable pavement (1)
- Water permeable pavements TR 11A (9)
No result
Documenttype
Certificatie instelling
No result
Certificatiesysteem
Proefmethode
- Afl. proefmethodes 01.03 : Bepaling van de Atterbergse grenzen (2)
- CEN/TS 12390-9 : Freeze-thaw resistance with de-icing salts (4)
- CMA/2/I/B.1 : Metalen met inductief gekoppeld plasma atoomemissiespectrometrie (ICP-AES) (4)
- CMA/2/I/B.3 : Kwik (4)
- CMA/2/I/B.5 : Kjeldahl stikstof (4)
- CMA/2/I/C.2.2 : Fotometrische bepaling van het totale cyanidegehalte met een doorstroomanalysesysteem (SFA) (4)
- CMA/2/I/C.2.3 : Fotometrische bepaling van het vrije cyanidegehalte met een doorstroomanalysesysteem (SFA) (4)
- CMA/2/II/A.7 : Totaal organisch koolstofgehalte (TOC) (1)
- CMA/2/II/A.9.1 : Uitloging van anorganische componenten met de kolomproef voor bouwstof (4)
- CMA/2/II/A.22 : Vlottende, niet-vlottende verontreinigingen en glas op granulaire materialen (7)
- CMA/2/II/A.23 : Vlottende, niet-vlottende verontreinigingen en glas op fijnkorrelige materialen (8)
- CMA/2/II/C.2 : Bepaling asbest in gerecycleerde granulaten (6)
- CMA/3/B : Polycyclische aromatische koolwaterstoffen (4)
- CMA/3/E : Oplosmiddelen specifiek (4)
- CMA/3/I : Organochloorpesticiden, polychloorbifenylen en hogere chloorbenzenen (4)
- CMA/3/R.1 : Minerale olie met GC/FID (4)
- CME 01.03 : Détermination des limites d'Atterberg (1)
- DIN 1187 : Détermination des paramètres de perforation (2)
- DIN 1187 : Résistance au choc (1)
- DIN 8075 : Lenght variation after warm-up (1)
- DIN 8075 : Resistance to internal pressure (2)
- ISO 37 : Elongation at break (4)
- ISO 37 : Tensile strength (4)
- ISO 48-2 : Hardness IRHD-micro (3)
- ISO 48-2 : Hardness IRHD - N (2)
- ISO 188 + ISO 37 : Elongation at break after ageing (2)
- ISO 188 + ISO 37 : Tensile strength after ageing (2)
- ISO 188 + ISO 48-2 : Hardness IRHD-micro after ageing (2)
- ISO 188 + ISO 48-2 : Hardness IRHD - N after ageing (1)
- ISO 188 : Ageing (2)
- ISO 815-1 : Compression set (4)
- ISO 1817 : Effects of liquids (3)
- ISO 3384-1 : Stress relaxation in compression (1)
- ISO 8340 : Bonding strength (1)
- NBN 589-207 : Teneur en matières organiques (3)
- NBN 589-209 : Essai à l'acide chlorhydrique (Teneur en matières calcaires ou fragments de coquillages) (8)
- NBN B 11-256 : Teneur conventionnelle en matières organiques - Méthode d'essai à l'eau oxygénée (10)
- NBN B 15-215 : Water absorption by immersion (19)
- NBN B 15-238 : Bending test on prismatic samples (1)
- NBN B 21-101 + NBN EN 1917: crushing strenght (2)
- NBN B 21-101+ add. 1 + NBN EN 1917: Longitudinal bending moment resistance (1)
- NBN B 21-101+ add. 1 + NBN EN 1917: steel fiber content (1)
- NBN B 21-106 + NBN EN 1916: crushing strenght (2)
- NBN B 21-106 + NBN EN 1916: Ductility (2)
- NBN B 21-106 + NBN EN 1916: steel fiber content (2)
- NBN EN 124-1 : Load bearing (3)
- NBN EN 124-1 : Permanent set (3)
- NBN EN 196-2 : Carbon dioxide content (3)
- NBN EN 196-3 : Determination of setting times and soundness (5)
- NBN EN 459-2 : Calcium hydroxide content (2)
- NBN EN 598 : Ductile iron pipes for sewerage applications - Thickness of cement (1)
- NBN EN 598 : Ductile iron pipes for sewerage applications - Thickness of iron (1)
- NBN EN 727 : VICAT softening temperature (1)
- NBN EN 728 : Oxidation induction time (1)
- NBN EN 744 : Resistance to external blows (1)
- NBN EN 772-1: compressive strength (5)
- NBN EN 772-6: bending tensile strength (1)
- NBN EN 772-11: water absorption due to capillary action (3)
- NBN EN 772-14: moisture movement of aggregate concrete and manufactured stone masonry units (2)
- NBN EN 932-3 : Petrographic description (1)
- NBN EN 933-1 : Determination of particle size distribution - Sieving method (20)
- NBN EN 933-3 : Flakiness index (16)
- NBN EN 933-5 : Percentage of crushed and broken surfaces (10)
- NBN EN 933-6 : Angularity of fine aggregate (7)
- NBN EN 933-7 : Percentage of shells in coarse aggregates (5)
- NBN EN 933-8 : Sand equivalent test (4)
- NBN EN 933-9 : Methylene blue test (9)
- NBN EN 933-10 : Grading of fillers (air jet sieving) (3)
- NBN EN 1097-1 : Resistance to wear (micro-Deval) (10)
- NBN EN 1097-2 : Los Angeles - Resistance to fragmentation (13)
- NBN EN 1097-4 : Voids of dry compacted filler (3)
- NBN EN 1097-5 : Water content (11)
- NBN EN 1097-6 : Particle density (14)
- NBN EN 1097-7 : Particle density of filler (pycnometer) (4)
- NBN EN 1097-8 : Polished stone value (4)
- NBN EN 1317-1 : Road restraint systems - Part 1: Terminology and general criteria for test methods (1)
- NBN EN 1317-2 : Road restraint systems - Part 2: Performance classes, impact test acceptance criteria and test methods for (1)
- NBN EN 1317-3 : Road restraint systems - Part 3: Performance classes, impact test acceptance criteria and test methods for (1)
- NBN EN 1338: Abrasion (5)
- NBN EN 1338: Freeze/thaw resistance (3)
- NBN EN 1338: Tensile splitting strenght (7)
- NBN EN 1338: Water absorption (5)
- NBN EN 1339: Abrasion (4)
- NBN EN 1339: Flexural strenght (6)
- NBN EN 1339: Freeze/thaw resistance (3)
- NBN EN 1339: Water absorption (5)
- NBN EN 1340: Abrasion (5)
- NBN EN 1340: Flexural strenght (6)
- NBN EN 1340: Freeze/thaw resistance (3)
- NBN EN 1340: Water absorption (5)
- NBN EN 1367-1 : Resistance to freezing and thawing (7)
- NBN EN 1367-2 : Magnesium sulfate test (1)
- NBN EN 1423 - Annex A : Refractive index (2)
- NBN EN 1423 - Annex B : Resistance to the effects of water, hydrochloric acid, calcium chloride and sodium sulfide (2)
- NBN EN 1423 - Annex D : Quality (2)
- NBN EN 1423 - Annex E : Moisture proof (procedure B) (1)
- NBN EN 1423 - Annex G : Friability index (1)
- NBN EN 1423 - Annex I : Dangerous substances (1)
- NBN EN 1426 : Needle penetration (7)
- NBN EN 1427 : Ring & Ball softening point (6)
- NBN EN 1428 : Water content in bitumen emulsions (1)
- NBN EN 1429 : Residue on sieving 0,5 mm (1)
- NBN EN 1433 § 9.1 : Test methods for strength (2)
- NBN EN 1433 § 9.3.6 : Watertightness (2)
- NBN EN 1436 - Annex A : Luminance coefficient under diffuse illumination (Qd) (1)
- NBN EN 1436 - Annex B : Coefficient of retroreflected luminance (RL) (1)
- NBN EN 1436 - Annex C : Chromaticity co-ordinates and luminance factor (1)
- NBN EN 1436 - Annex D : Skid resistance (1)
- NBN EN 1744-1 § 7 : Chloride ions contents (5)
- NBN EN 1744-1 § 10 : Chemical analysis - determination of water-soluble sulfates (3)
- NBN EN 1744-1 § 11 : Chemical analysis - determination of total sulfur content (3)
- NBN EN 1744-1 § 12 : Chemical analysis - acid soluble sulfates (3)
- NBN EN 1744-1 § 15.1 : Chemical analysis - organic matter - humus content (10)
- NBN EN 1744-1 § 15.2 : Chemical analysis - organic matter - fulvoacid content (8)
- NBN EN 1744-1 § 15.3 : Chemical analysis - organic matter - mortar test (1)
- NBN EN 1744-1 § 18 : Expansion (1)
- NBN EN 1744-1 § 18 : Free lime (1)
- NBN EN 1744-4 : Water susceptibility of fillers (2)
- NBN EN 1744-5 : Determination of acid soluble chloride salts (1)
- NBN EN 1744-6 : Determination of the influence of recycles aggregate extract on the initial setting time of cement (1)
- NBN EN 1790 - Annex B : Ash content (1)
- NBN EN 1871 - Annex A : Coordonnées trichromatiques et facteur de luminance (1)
- NBN EN 1871 - Annex B : Hiding power (1)
- NBN EN 1871 - Annex G : Softening point (1)
- NBN EN 1871 - Annex H : Cold impact (1)
- NBN EN 1871 - Annex H : Heat stability (1)
- NBN EN 1916: Water absorption (10)
- NBN EN 1917: Water absorption (9)
- NBN EN 1926 : Determination of uniaxial compressive strengh (3)
- NBN EN 1936 : Determination of real density and apparent density and of total and open porosity (3)
- NBN EN 10218-1 : Steel wire - wire diameter (1)
- NBN EN 10223-3 : Tensile strength (1)
- NBN EN 10244-2 : Steel wire - Adhesion of corrosion protection (1)
- NBN EN 10244-2 : Steel wire - Minimal corresion protection (1)
- NBN EN 12224 : Resistance to weathering (3)
- NBN EN 12225 : Microbiological resistance (1)
- NBN EN 12371 : Determination of frost resistance (4)
- NBN EN 12372 : Determination of flexural strength under concentrated load (2)
- NBN EN 12390-3 + NBN EN 1916 : Compressive strength (12)
- NBN EN 12390-3 + NBN EN 1917 : Compressive strength (13)
- NBN EN 12390-3 : Compressive strength (21)
- NBN EN 12390-5 : Flexural strength (6)
- NBN EN 12390-7 : Density (6)
- NBN EN 12407 : Petrographic examination (1)
- NBN EN 12447 : Hydrolyse (3)
- NBN EN 12591 - Annex A : Penetration grade (1)
- NBN EN 12592 : Solubility (2)
- NBN EN 12593 : Fraass breaking point (2)
- NBN EN 12595 : Kinematic viscosity (2)
- NBN EN 12607-1 : Resistance to hardening RTFOT (2)
- NBN EN 12697-1 : Soluble binder content (13)
- NBN EN 12697-2 : Particle size distribution (13)
- NBN EN 12697-3 : Binder recovery (4)
- NBN EN 12697-12 : Water sensitivity (1)
- NBN EN 12697-20 : Indentation using cube or Marshall specimens (4)
- NBN EN 12697-22 : Wheel tracking (1)
- NBN EN 12697-23 : Indirect tensile strength (1)
- NBN EN 12697-24 : Resistance to fatigue (1)
- NBN EN 12697-26 : Stiffness (1)
- NBN EN 12697-28 : Preparation of samples (1)
- NBN EN 12697-31 : Specimen preparation by gyrator compactor (1)
- NBN EN 12697-47 : Ash content (1)
- NBN EN 12802 - Annex A : Solid content (2)
- NBN EN 12802 - Annex B : Binder content (2)
- NBN EN 12802 - Annex B : Identification of the binder (2)
- NBN EN 12802 - Annex C : Content of the pigments and inorganic constituents (1)
- NBN EN 12802 - Annex D : Titanium dioxide content (2)
- NBN EN 12802 - Annex E : Glass bead content (2)
- NBN EN 12802 - Annex F : Identification of the solvent (1)
- NBN EN 12802 - Annex G : Content of pigments and inorganic constituents (2)
- NBN EN 12802 - Annex H : Ash content (2)
- NBN EN 12846-1: Determination of efflux time by the efflux viscometer (1)
- NBN EN 12850 : pH (1)
- NBN EN 13036-4: Method for measurement of slip/skid resistance of a surface: The pendulum test (1)
- NBN EN 13074-1 : Recovery of binder (1)
- NBN EN 13074-2 : Stabilization after recovery by evaporation (1)
- NBN EN 13075-1 : Breaking value (1)
- NBN EN 13179-2 : Bitumen number (3)
- NBN EN 13286-2 : Proctor compaction (7)
- NBN EN 13286-41 : Compressive strength (9)
- NBN EN 13286-47 : Immediate bearing index (IPI) (3)
- NBN EN 13302 : dynamic viscosity (1)
- NBN EN 13369 +A1 appendix G: Water absorption (1)
- NBN EN 13398 : Elastic recovery at 25°C (3)
- NBN EN 13588 : Cohesion energy by pendulum test (1)
- NBN EN 13589 : Tensile properties by the force ductility method (1)
- NBN EN 13755 : Determination of water absorption at atmospheric pressure (3)
- NBN EN 13880-1 : Density (1)
- NBN EN 13880-2 : Cone penetration (1)
- NBN EN 13880-3 : Penetration and recovery (1)
- NBN EN 13880-5 : Flow resistance (1)
- NBN EN 14030 : Determining the resistance to acid and alkaline liquids (2)
- NBN EN 14066 : Determination of resistance to ageing by thermal shock (1)
- NBN EN 14157 : Determination of abrasion resistance - Method A (Capon) (3)
- NBN EN 14227-1 : Compressive strength (average) (9)
- NBN EN 14227-3 : Compressive strength (average) (8)
- NBN EN 14227-5 : Compressive strength (average) (9)
- NBN EN 14231 : Determination of the slip resistance (2)
- NBN EN 14769 : Accelerated long term ageing conditioning by a Pressure Ageing Vessel (PAV) (1)
- NBN EN 14771 : Flexural creep stiffness - Bending Beam Rheometer (BBR) (1)
- NBN EN 15326 : Density and specific gravity (1)
- NBN EN 16849 : Water content - Method using a drying balance (1)
- NBN EN ISO 148-1 : Charpy impact test (V) (2)
- NBN EN ISO 306 : VICAT softening temperature (1)
- NBN EN ISO 527-1 : Tensile properties (4)
- NBN EN ISO 527-2 : Tensile properties (3)
- NBN EN ISO 527-3 : Tensile properties (4)
- NBN EN ISO 787-9 : Chemical characteristics (1)
- NBN EN ISO 1133-1 : Melt mass-flow rate (2)
- NBN EN ISO 1167-1 : Resistance to internal pressure (1)
- NBN EN ISO 1183-1 : Density of non-cellular plastics (Part 1 : Immersion method) (2)
- NBN EN ISO 1460 : Thickness of the coating (for zinc) (1)
- NBN EN ISO 2505 : Longitudinal reversion (2)
- NBN EN ISO 2591-1 : Grading (2)
- NBN EN ISO 2592 : Flash and fire points - Cleveland open cup method (2)
- NBN EN ISO 2811-1 : Density (2)
- NBN EN ISO 2811-2 : Density - Immersed body (plummet) method (1)
- NBN EN ISO 3126 : Dimensions (1)
- NBN EN ISO 3838 : Relative density (1)
- NBN EN ISO 4892-3 : Resistance to UV radiation (1)
- NBN EN ISO 6259-1 : Tensile properties (2)
- NBN EN ISO 6506-1 : Brinell hardness (3)
- NBN EN ISO 6507-1 : Vickers hardness (3)
- NBN EN ISO 6508-1 : Rockwell hardness (3)
- NBN EN ISO 6892 : Metal - Tensile testing (1)
- NBN EN ISO 6892-1 : Metal - Tensile testing - Elongation (4)
- NBN EN ISO 6892-1 : Metal - Tensile testing - Tensile strength (4)
- NBN EN ISO 6892-1 : Metal - Tensile testing - Yield strength (4)
- NBN EN ISO 7389 : Elastic recovery (1)
- NBN EN ISO 7390 : Resistance to flow (1)
- NBN EN ISO 9047 : Adhesion / Cohesion (1)
- NBN EN ISO 9863-1 : Determination of thickness at specified pressures (1)
- NBN EN ISO 9864 : Determination of the mass per unit area (4)
- NBN EN ISO 9969 : Ring stifness (2)
- NBN EN ISO 10319 : Elongation at break (4)
- NBN EN ISO 10319 : Tensile strength (4)
- NBN EN ISO 11058 : Water permeability normal to the plane (4)
- NBN EN ISO 12236 : Static puncture test (CBR) (4)
- NBN EN ISO 12956 : Characteristic opening size (4)
- NBN EN ISO 12958 : Water flow capacity in their plane (3)
- NBN EN ISO 13259 : Leaktightness (2)
- NBN EN ISO 13431 : Creep (2)
- NBN EN ISO 13433 : Dynamic perforation test (cone drop test) (4)
- NBN EN ISO 13438 : Oxidation (3)
- NTN 018: Freeze/thaw resistance (2)
- prNBN T 42-113 : Déformation sous charge linéaire (1)
- prNBN T 42-113 : Détermination des paramètres de perforation (2)
- prNBN T 42-113 : Diamètre (1)
- prNBN T 42-113 : Résistance au choc (1)
- PTV 100+add. 1 + add. 2 + add. 3: Druksterkte (5)
- PTV 100+add. 1 + add. 2 + add. 3: Wateropslorping (4)
- PTV 104: Perméabilité (1)
- PTV 126 + NBN EN 1338: Tensile splitting strenght (5)
- PTV 126 + NBN EN 1340: Flexural strenght (4)
- PTV 126: Belasting bij 2 opleggingen (3)
- PTV 126: Perméabilité (2)
- PTV 126: Waterdoorlatendheid voor hybride producten (1)
- PTV 406 - Annex C : Essai de classification (3)
- PTV 803 : Load bearing (1)
- PTV 803 : Permanent set (1)
- PTV 812 : Solubilité dans l’acide chlorhydrique (1)
- PTV 817 - Bijlage B : Détermination des contaminants flottants, non-flottants et dépistage de l'amiante sur sables lavés (2)
- PTV 823: Bijlage D: Beproevingsmethode voor de wateropslorping (1)
- PTV 828 : Déformation (1)
- PTV 828 : Résistance à la traction de la jonction (1)
- PTV 828 : Résistence à la compression (1)
- PTV 828-1 §4.9 : Déformation (1)
- PTV 828-1 §4.9 : Résistence à la compression (1)
- PTV 854 : ΔTc (1)
- PTV 855 : ΔTc (1)
- PTV 861 : Aptitude au compactage (1)
- PTV 861 : Capacité de durcissement (1)
- PTV 861 : Résistance à l'orniérage (1)
- PTV 861 : Résistance au désenrobage (1)
- PTV 861 : Résistance indirecte à la traction (1)
- PTV 861 : Stabilité (1)
- PTV 861 §4.3: Korrelverdeling (1)
- PTV 861 §4.4: Gehalte residuaal bindmiddel (1)
- PTV 863 : pH (1)
- PTV 863 : Teneur en cellulose (1)
- PTV 863 : Teneur en fibres (1)
- PTV 866 : Pénétrabilité à l'aiguille à 25 °C (1)
- PTV 866 : Point de ramollissement (1)
- PTV 888 : Identification of the inorganic content (1)
- PTV 888 : Identification of the organic content (1)
- RNR 50-1 : Résistance au gel dégel en présence de sels de déverglaçage (4)
- SB 250 - Hfst 14 : 4.9 : Doorlatendheid drainerend schraal beton (4)
- SB 250 - Hfst 14 : 4.15 : Gehalte organische stoffen met waterperoxide (6)
No result
Filter toepassen
Er werden geen resultaten gevonden.